The solvent recovery unit SRS-BRAD XP has a tank capacity of 28 liters (7.40 US gallons) and a distillation rate of approximately 8-11 liters (3 US gallons) per hour.
How does it work?
Dirty solvent is poured into the disposable bag inside the teflon-lined tank, and the stainless steel lid is replaced and clamped down. As the temperature rises above the boiling point of the solvent being recovered, the solvent vaporizes into a gaseous state through the insulated exhaust tube into the air-cooled condenser where it is condensed into a reusable solvent. The disposable bag containing the remaining solids in the still bottom can then be removed for disposal and the system is ready to process the next batch.
Tank capacity 7.4 US gal / 28 litres
Approximate recovery rate 3 US gal** / 8-11 (liters)** per hour
**May differ according to products and % of residue
Electrically heated, may reach 450º F (232 ºC)
De-Sta-C0 lid clamping system
Explosion proof electrical Class 1, Division 1
Temperature controlled electronically
CSA approved certified to UL standard 2208
Liner bags available
Solvent-resistant external finish
Optional : Stainless steel tank & condenser
Optional : Vacuum system, water separator, etc…
Explosion Proof Class 1, Division 1
Power 3 Kw / h
Stainless steel tank liner
Stainless steel condenser
Water separator for non azeotropic products