For marine environment (salty water). The solvent recovery unit SRS-75 XPM has a tank capacity of 20 liters (7.5 US gallons) and a distillation rate of approximately 8-11 liters (3 US gallons) per hour.
How does it work?
COMPARE TO MOST SMALL SOLVENT RECYCLING SYSTEMS ON THE MARKET, THE ELECTRIC AND ELECTRONIC CONTROLS OF THE XPM SERIE OF RECYCLERS ARE LOCATED IN A SEALED ENCLOSURE AND NOT AFFECTED BY CORROSIVE SALTY AIR AND WATER.
Dirty solvent is poured in the disposable liner bag inside theTeflon-lined tank, and the aluminum lid is clamped down. As the temperature rises above the boiling point of the solvent being recovered, the solvent vaporizes into a gaseous state through the insulated exhaust tube into the air-cooled condenser where it is condensed into a reusable solvent. The remaining solids in the still bottom can then be removed for disposal and the system is ready to process the next batch.
Tank capacity 7.5 US gal. /20 liters
Approximate recovery rate 3 US gal. /8-11 (liters) per hour ** *May differ according to products and % of residue.
Electrically heated, may reach 500º F (260 ºC)
De-Sta-C0 lid clamping system
Explosion proof electrical Class 1, Division 1
Temperature controlled electronically
CSA approved certified to UL standard 2208
Liner bags available
Solvent-resistant external finish
Width in. (cm) 20 (51)
Height in. (cm) 58 (147)
Length in. (cm) 36 (91)
Weight lbs. (Kg) 180 (82)
NEMA 7 XP Explosion Proof Class 1, Division 1
Cycle 60 (50 optional)
Power 3 Kw / h
Stainless steel tank liner
Stainless steel condenser
Water separator for non azeotropic products
Transformer (from different voltage to 220v)