The solvent recovery unit SRS-550 XPM has a tank capacity of 208 liters (55 US gallons) and a distillation rate of approximately 30-40 liters (8-16 US gallons) per hour.

How does it work?

Dirty solvent is poured in the disposable liner bag inside theTeflon-lined tank, and the aluminum lid is clamped down. As the temperature rises above the boiling point of the solvent being recovered, the solvent vaporizes into a gaseous state through the insulated exhaust tube into the air-cooled condenser where it is condensed into a reusable solvent. The remaining solids in the still bottom can then be removed for disposal and the system is ready to process the next batch.


Tank capacity 55 US gal. /208 (liters)
Approximate recovery rate 8-16** US gal. / 30-60** (liters) per hour.
*May differ according to products and % of residue.
Teflon-coated tank
Electrically heated, may reach 500º F (260 ºC)
Air-cooled condensor
De-Sta-C0 lid clamping system
Explosion proof electrical Class NEMA 7
Temperature controlled electronically
CSA approved certified to UL standard 2208
Liner bags available
Solvent-resistant external finish
Optional: Stainless steel tank & condenser
Optional: Vacuum system, water separator, auto-fill system, fast cooling, etc …

Electrical features

NEMA 7 XP Explosion Proof Class 1, Division 1
Voltage 220
Cycle 60 (50 optional)
Amperage 50

Power 10 Kw / h


Stainless steel tank liner
Stainless steel condenser
Vacuum system
Manual filling with pump
Automatic filling with pump
Continuous distillation system
Fast cooling system
Water separator for non azeotropic products
Collecting tank for distilled solvent
Sludge basket tilter


Width in.(cm) 42 (107)
Height in.(cm) 65 (165)
Length in.(cm) 60 (152)
Weight lbs.(Kg) 200 (318)